The use of photovoltaic brackets needs to be used according to the needs of photovoltaic construction, under the important situation of the current environmental protection situation, the types of photovoltaic brackets used in the market are common as follows: single column solar brackets, double column solar brackets, matrix solar brackets, rooftop solar brackets, wall solar brackets, tracking system series brackets, these several types of photovoltaic bracket systems can be improved according to different needs, according to the installation method is divided into roof, ground, building type. These installation methods and system structures are integrated into the design.
The current formation of a large-scale commodity market for photovoltaic brackets is mainly based on the type of unregulatable brackets, and other types such as tracking are affected by the comparison of income and input, and are subject to certain development restrictions. Therefore, the development of the current photovoltaic bracket needs to consider the needs of the use of the belt integrated design.
At present, the types of photovoltaic bracket materials used in China are divided into three categories of section steel, aluminum alloy and concrete brackets, and the main use is divided into echoing the above three use environments, concrete brackets are mainly used in large projects and outdoors, of course, there are some limited requirements. Aluminum alloy bracket is widely used, the use of the occasion to civilian-oriented, the scope of use of a wide range of light weight, beautiful, corrosion resistance as the main characteristics of the bracket, and the scope of application of the steel bracket can be as needed in small brackets, medium brackets, steel brackets wider application range.
From the perspective of comprehensive application, whether it is the material of the photovoltaic bracket or the type of photovoltaic bracket system, it cannot completely affect the application of the photovoltaic bracket, and the application of the photovoltaic bracket is the main development direction of the photovoltaic bracket. The design of photovoltaic brackets needs to be from multiple perspectives. Including compressive ability, corrosion capacity, etc., to form a long-term system support for the service life, is the photovoltaic bracket in the use of performance optimization.
| Relevant news
How to choose a smart PV tracking bracket?
The principle of the smart photovoltaic tracker is to make the solar panel change with the angle of the sun and always face the sun, so that the sun's rays shine directly on the solar panel power unit
Analysis of the photovoltaic tracking bracket industry
Fixed bracket entry doors] have low sills, low interest rates and severe product homogenization. In the context of photovoltaic parity, in the past, more attention was paid to equipment investment, an
What are the characteristics of the photovoltaic tracking bracket?
When the sun's rays are perpendicular to the panels, the amount of solar energy that can be received is important and the amount of electricity generated is also high. But the Earth has been spinning,
What is a smart PV tracking bracket system?
Technological innovation is conducive to the increase in photovoltaic reception capacity, conversion rate and total electricity production demand. The smart PV tracking system greatly increases the am
What are the types of ground PV bracket foundations and flat roof PV bracket foundations?
Drilling and pouring pile foundation: it is more convenient to form a hole, and the top surface of the foundation can be adjusted according to the terrain, the top elevation is easy to control, the am
What is the appropriate angle for installing a photovoltaic bracket?
There are many different ways to say about the angle problem in many places, and because there are many differences in different regions, the specific angle calculation is relatively complicated.
The development of photovoltaic brackets, bracket types applied in the market
The use of photovoltaic brackets needs to be used according to the needs of photovoltaic construction, under the importance of the current environmental protection situation, the types of photovoltaic
What is a grid-connected power generation system in photovoltaic engineering?
With the increasingly serious energy depletion and environmental problems, solar photovoltaics, as a clean and environmentally friendly green energy, are the foundation of the future renewable energy
Let the photovoltaic engineering photovoltaic grid-connected power generation system and off-grid power generation system difference
Grid connection refers to access to the public power grid, connecting solar power generation, home power grid and public power grid. It is an electricity production system that must rely on the operat
Answer What are the raw materials for photovoltaic engineering modules?
Photovoltaic power generation systems are made of different materials, but all components include multi-layered materials, from the light-facing side to the backlit side. Sunlight first passes through